 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Technical Data Sheet 5484/GADC-AMPA/X/MS Features High luminous intensity output Oval Shape Well defined spatial radiation Wide viewing angle (21/2) : 110o / 40o UV resistant epoxy The product itself will remain within RoHS compliant version Descriptions This precision optical performance oval LED is specifically designed for passenger information signs This lamp has matched radiation patterns with red and blue mixing color applications Applications Color graphic signs Message boards Variable message signs (VMS) Commercial outdoor advertising Device Selection Guide LED Part No. 5484/GADC-AMPA/MS 5484/GADC-AMPA/P/MS Chip Material InGaN Emitted Color Brilliant Green Lens Color Green Diffused Stopper No Yes Everlight Electronics Co., Ltd. Device Number : DLE-548-025 http\\:www.everlight.com Prepared date: 10-19-2007 Rev 2 Page: 1 of 6 Prepared by: Grace Shen Technical Data Sheet 5484/GADC-AMPA/X/MS Package Dimensions Stopper Type No Stopper Type Notes: All dimensions are in millimeters, tolerance is 0.25mm except being specified. Protruded resin under flange is 1.5mm Max LED. Bare copper alloy is exposed at tie-bar portion after cutting. Everlight Electronics Co., Ltd. Device Number : DLE-548-025 http\\:www.everlight.com Prepared date: 10-19-2007 Rev 2 Page: 2 of 6 3 Prepared by: Grace Shen Technical Data Sheet 5484/GADC-AMPA/X/MS Absolute Maximum Rating (Ta=25) Parameter Symbol Absolute Maximum Rating Forward Current IF 30 Pulse Forward Current (Duty1/10@ 1KHz) IFP 100 Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +100 260 5 Soldering Temperature Tsol Power Dissipation Pd 100 Reverse Voltage VR 5 Notes: Soldering time5 seconds. Unit mA mA mW V Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Half width Forward Voltage Reverse Current Rank Luminous Intensity Symbol IV 21/2 p d VF IR M 1800~2250 Min. 1800 --525 -2.8 -Typ. 2250 X:110 Y:40 518 530 35 3.4 -N 2250~2850 Max. 3600 --535 -3.6 50 P 2850~3600 Unit:mcd Unit mcd deg nm V A Condition IF=20mA VR=5V Rank Combination (IF=20mA) *Measurement Uncertainty of Luminous Intensity: 15% Rank Forward Voltage 0 2.8~3.0 1 3.0~3.2 2 3.2~3.4 3 3.4~3.6 Unit:V *Measurement Uncertainty of Forward Voltage: 0.1V Rank Dominant Wavelength 1 2 530~535 Unit:nm 525~530 *Measurement Uncertainty of Dominant Wavelength 1.0nm *The quantity ratio of the ranks is decided by EVERLIGHT. Everlight Electronics Co., Ltd. Device Number : DLE-548-025 http\\:www.everlight.com Prepared date: 10-19-2007 Rev 2 Page: 3 of 6 Prepared by: Grace Shen Technical Data Sheet 5484/GADC-AMPA/X/MS Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device Number : DLE-548-025 http\\:www.everlight.com Prepared date: 10-19-2007 Rev 2 Page: 4 of 6 Prepared by: Grace Shen Technical Data Sheet 5484/GADC-AMPA/X/MS Packing Quantity Specification 1.500PCS/1Bag5Bags/1Box 2.10Boxes/1Carton Label Form Specification EVERLIGHT CPN: P/N: RoHS 5484/GADC-AMPA/X/MS QTY CAT: LOT NO HUE: REF: CPN: Customer's Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous Intensity and Forward Voltage HUE: Rank of Dominant Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place MADE IN TAIWAN Everlight Electronics Co., Ltd. Device Number : DLE-548-025 http\\:www.everlight.com Prepared date: 10-19-2007 Rev 2 Page: 5 of 6 Prepared by: Grace Shen Technical Data Sheet 5484/GADC-AMPA/X/MS Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. 4. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering Temp. at tip of iron Soldering time Distance 400 Max. (30W Max.) 3 sec Max. 3mm Min.(From solder joint to case) Preheat temp. Bath temp. Bath time. Distance DIP Soldering 100 Max. (60 sec Max.) 265 Max. 5 sec Max. 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. Device Number : DLE-548-025 http\\:www.everlight.com Prepared date: 10-19-2007 Rev 2 Page: 6 of 6 Prepared by: Grace Shen |
Price & Availability of 5484GADCAMPAXMS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |